Planning
That New-Home Smell After Renovation: What Formaldehyde Is and What Actually Helps
That sharp smell after renovation is often formaldehyde. Where it comes from, why Singapore's heat makes it worse, and what really reduces it.
October 27, 2026

By The TAD Journal · Reviewed by Alex Yang
Short answer
The sharp "new-home smell" is mostly formaldehyde from the glue in carpentry boards, and Singapore's heat makes it worse. What reduces it most: low-emission boards such as E0, weeks of airing with windows open, and not rushing the move-in.
Walk into a freshly renovated flat and you'll often notice it straight away. A sharp, slightly sweet smell that catches the back of your throat. Many people call it the new-home smell. A good part of it is usually formaldehyde.
Where it comes from
Formaldehyde is used in the glues that hold many engineered wood boards together, the particleboard, MDF and plywood inside most built-in carpentry. It also comes from some paints, adhesives and finishes. The boards release it slowly into the air, most strongly in the first weeks and months.
Heat and humidity speed that up. Which is a problem in Singapore, where a closed-up flat can sit warm and damp all day while you're at work.
Why it matters
At higher levels, formaldehyde irritates the eyes, nose and throat and can bring on headaches. Young children, older family members and anyone with asthma tend to notice it first. The World Health Organization's indoor air guideline for formaldehyde is 0.1 mg/m³ averaged over 30 minutes, which gives you a sensible benchmark if you do test.
What actually helps
Start with the boards. The cheapest formaldehyde to remove is the formaldehyde that was never installed. Ask what emission grade the carpentry boards are. Lower-emission grades like E0 cost a bit more and release far less. Carpentry is usually the biggest line in a renovation quote (we break that down in where your renovation budget actually goes), so this conversation belongs at the quotation stage, not after move-in.
Ventilate, a lot. Open windows and run fans for the weeks after carpentry is installed. Moving air carries emissions out. A sealed room with the air-conditioner on just recirculates them.
Give it time before moving in, especially if you have a baby or an elderly parent joining you. Build airing-out time into your schedule instead of moving in the day after handover. If a parent is moving in, our guide to making the home safer for seniors is worth reading at the same stage.
Open the cabinets. The inside of a closed wardrobe is where emissions build up. Leave doors and drawers open while you air the flat.
Questions to ask before you sign the quote
- What board is used for the carcass, and what for the doors? Brand and emission grade for each.
- Can you show the supplier's certificate for that grade?
- What's the price difference if every board is upgraded to a low-emission grade?
- Which adhesives and paints are being used, and are they low-VOC?
- How many days of airing should we plan between carpentry and move-in?
A contractor who can't answer the first two clearly is telling you something.
What helps less than you'd hope
Houseplants and charcoal bags are pleasant, but in a real home they make very little difference to formaldehyde levels. Treatment sprays can reduce what comes off surfaces, and some are worth using, but they don't replace good boards and fresh air.
If you want to test, be careful with cheap handheld meters. Many give readings that jump around and aren't reliable. A proper test by someone with calibrated equipment tells you far more than a gadget from an online marketplace.
The short version
Choose low-emission boards, air the home well, and don't rush the move-in. Those three habits do most of the work.
Want to talk materials before you commit?
Ask us about board grades and finishes on our enquiry page, or WhatsApp us. It's a much easier conversation before carpentry is built.
About this article
Written by the TAD design team for The TAD Journal. Every article is reviewed by Alex Yang, co-founder of The Assembly Design. While Lopez Lam leads the design, Alex builds what holds it together: the standards each project is checked against, the team that carries them out, and a network of overseas makers for materials you won't find on the usual showroom shelf.