Journal

Bedroom

Planning a Wardrobe for an HDB Bedroom: Height, Doors and the Inside Bits That Matter

Full height or not, sliding or swing, and how to plan the inside so it fits what you own. A practical wardrobe guide for HDB bedrooms.

November 3, 2026

Open white wardrobe with hanging clothes and internal drawers in a bedroom

By The TAD Journal · Reviewed by Alex Yang

Short answer

In most HDB bedrooms, build the wardrobe to full height and plan the inside around what you actually own. Choose sliding doors if swing doors would hit the bed, spend on good tracks, and leave room for air so humidity doesn't make it musty.

A wardrobe is usually the biggest piece of carpentry in a bedroom, and the one people spend the least time planning. The doors get all the attention. The inside, where you actually live with it every morning, gets a generic layout copied from a catalogue.

Start with what you own

Before you look at a single laminate, count your clothes. Roughly how many things do you hang, and how many do you fold? How many long dresses, coats or robes? How many pairs of shoes or bags need a home? Two people sharing a wardrobe rarely have the same answer, and the layout should reflect that.

A wardrobe designed around your actual stuff holds more than a bigger one designed around nobody in particular.

Should it reach the ceiling?

In most HDB bedrooms, yes. A full-height wardrobe gives you top compartments for suitcases, winter clothes and things you use twice a year. It also removes the dusty gap on top that nobody ever cleans.

The exception: if a beam or an aircon ledge interrupts the ceiling line, design around it deliberately instead of letting the wardrobe stop at an awkward height. And if the room is small and low, a wardrobe that stops short with a clean shadow line can make it feel less boxed in.

Sliding or swing doors?

Swing doors let you see everything at once and are simpler to maintain. But they need clear space in front of them to open. In a tight bedroom, a swing door that hits the bed every time isn't a door, it's an argument.

Sliding doors save that floor space. The trade-off is you can only open one section at a time, and cheap tracks are the first thing to go wrong. If you choose sliding, spend on the hardware.

A simple test: stand where the bed will go and imagine opening the doors. If you're shuffling sideways to do it, go sliding. Decide this on paper. Switching door type once the carcass is built is one of the more painful variation orders.

The inside bits worth paying for

  • Drawers inside the wardrobe rather than outside, so the front stays clean and doors can cover everything.
  • A section for long hanging, even a narrow one, so dresses and coats don't fold at the bottom.
  • Lighting that switches on when the door opens. Small cost, used every single day. It needs a power point planned inside the wardrobe before it's built.
  • Soft-close hinges and runners. You'll open these doors thousands of times.

A Singapore-specific warning

Humidity and mould are real here. A wardrobe built tight against an external wall, closed up in a warm room, is where musty smells start. Talk to your designer about ventilation, and avoid packing it so full that air can't move at all. A closed new wardrobe is also where the new-carpentry smell lingers longest, so it's worth asking about board grades too (see what formaldehyde is and what actually helps).

Bring this to your first meeting

  • A rough count: items hung, items folded, long pieces, shoes and bags, for each person.
  • Which side of the bed each person sleeps on, so their section is on the right side.
  • Anything bulky that needs a home: luggage, a vacuum, an ironing board, seasonal clothes.
  • Photos of any wardrobe interior you've liked, and what annoys you about your current one.

Planning your bedroom?

Bring your wish list, and ideally a rough count of what needs storing, to our enquiry page, or WhatsApp us. We'll design around what you actually own.

About this article

Written by the TAD design team for The TAD Journal. Every article is reviewed by Alex Yang, co-founder of The Assembly Design. While Lopez Lam leads the design, Alex builds what holds it together: the standards each project is checked against, the team that carries them out, and a network of overseas makers for materials you won't find on the usual showroom shelf.

Planning a renovation?

Talk to the team that designs and builds.

Share your property, timeline and budget. We will come back to you to arrange a consultation.

Send an enquiry